– Start installing door inner seal at top radius -arrow a- of door
aperture.
2.15
Removing and installing door outer seal
Note
Removal and installation are described only for the right door
♦
outer seal. Removal and installation of the left door outer seal
are similar.
Remove protective backing immediately before installation.
♦
Working temperature approx. 20 °C.
Adhesive remover -D 002 000 10- must be used exclusively.
♦
The door outer seal must be bonded in place immediately after
♦
cleaning.
Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
157
2. Rear door (Variant)