Removing And Installing Assembly Carrier - Volkswagen Jetta 2005 Workshop Manual

Hide thumbs Also See for Jetta 2005:
Table of Contents

Advertisement

⇒ page 317
2.7
Removing and installing assembly car‐
rier
Note
The removal and installation sequence is only for the right as‐
sembly carrier. The removal and installation of the left assembly
carrier is similar.
Window regulator, door lock and loudspeaker are secured to the
assembly carrier.
The door lock can be removed only together with the assembly
carrier.
If door window cannot be lowered on electric window version, first
determine the cause of the fault.
To do this, read the fault memory of the convenience system us‐
ing vehicle diagnostic, testing and information system -VAS 5051
A- or -VAS 5052- ⇒ Vehicle diagnosis, testing and information
system VAS 5051.
If an electrical fault exists, rectify it first.
If an electric fault occurs on window regulator motor, it can be
unscrewed from assembly carrier and door window can be slid by
hand in the necessary repair position.
2.7.1
Removing
Remove door handle
⇒ page 152
– Remove door trim ⇒ General body repairs, interior; Rep. Gr.
70 ; Roof trims .
General body repairs, exterior - Edition 10.2009
.
Golf Variant 2007 ➤ , Jetta 2005 ➤
2. Rear door (Variant)
145

Advertisement

Table of Contents
loading

This manual is also suitable for:

Golf variant 2007

Table of Contents