Removing And Installing Door - Volkswagen Jetta 2005 Workshop Manual

13 - Multi-point socket head bolt
❑ 20 Nm +
1
/ 4 turn further (90°).
❑ Always renew after loosening
1.5

Removing and installing door

Note
The removal and installation sequence is only for the right door.
The removal and installation of the left door is similar.
1.5.1 Removing
– Release boots -6- by pressing fastener -arrow a- and pull
boots off B-pillar.
– Swing release lever -7- downwards -arrow b- and disconnect
electrical connector -8- from coupling station.
– Remove bolts -4-, -5- and -11- from hinge using special door
alignment tool -3320- and bit -3320/3- .
Golf Variant 2007 ➤ , Jetta 2005 ➤
General body repairs, exterior - Edition 10.2009
107
1. Rear door (saloon)