Enabling The Mirror Mode To Produce A Mirror Image - GRAPHTEC FC4200-50 User Manual

6.5 Enabling the MIRROR Mode to Produce a Mirror Image

The MIRROR function selects the ON/OFF status of the MIRROR mode. Set the MIRROR mode to ON in
order to reverse the coordinate system as shown in the example below.
New origin
Y
Y
Original origin
Setting Procedure
(1) Press the PAUSE key, then press the
FORCE
F1
MARK
CLEAR
F2
SPEED
(2) Press the NEXT PAGE key until the menu below appears.
FORCE
F1
INTERFACE FUNCTION
FILM
F2
SPEED
(3) Press the (FUNCTION) key to display the menu below.
F3
FORCE
F1
ROTATE
THICK
F2
SPEED
(4) Press the (MIRROR) key to display the menu below.
F3
FORCE
F1
ON
F2
SPEED
(5) The currently selected setting is indicated by the asterisk ( * ) symbol.
To enable the MIRROR mode, press the
To disable the MIRROR mode, press the
X
Reversed coordinate system
When MIRROR mode is ON
When MIRROR mode is OFF
Original coordinate system
X
PEN U/D
SELECT PEN
PEN WIDTH
MIRROR
SORT
MIRROR
OFF *
NEXT PAGE key until the menu below appears.
OFFSET
F3
F4
QUALITY
OFFSET
F3
F4
QUALITY
OFFSET
F3
F4
QUALITY
OFFSET
F3
F4
QUALITY
(ON) key.
F2
(OFF) key.
F4
6 – 7