Table of Contents
Advertisement
36 MODE
7.8.7 2 positions staple pitch adjustment
Adjusting the pitch of the 2 positions staple.
A. Procedure
1. Enter the 36 mode.
2. "36 mode menu screen"
Press the [7. Finisher adjustment] key.
3. "Finisher adjustment mode menu screen"
Press the [7. 2 positions staple pitch adj.] key.
4. "2 positions staple pitch adjustment screen"
Press the [COPY SCREEN] key.
5. Set paper in the tray, set originals (more than 2
sheets) on RADF, and press the START but-
ton.
For the machine with platen cover, scan origi-
nals (more than 2 sheets) with [Store] key.
6. Check the pitch of the 2 positions staple.
A
7. When changing the dimension A, press the C
button while pressing the P button.
8. "2 positions staple pitch adjustment screen"
Enter a value with numeric keys and press the
[SET] key.
• Setting range: 120 to 160, 1 step: 1 mm
9. Repeat steps 4 to 8 until the dimension A is
appropriate.
10. Press the [PREVIOUS SCREEN] key to return
to the "Finisher adjustment mode menu
screen."
2
KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
7.9
List output mode
Output a variety of data.
A. Procedure
1. Enter the 36 mode.
2. "36 mode menu screen"
Press the [8. List output mode] key.
3. "List output mode menu screen"
List output mode items are as follows:
[1. Machine management list 1]
[2. Adjustment data list]
[3. Page fill data list]
[4. Machine management list 2]
[5. Parameter list]
[6. Memory dump list]
[7. Font pattern]
Note:
• Setting DPSW 30-1 to 1, [4. Machine manage-
ment list 2] and later appear.
4. Press the key of an item you want to output.
5. Select A4 or 8.5 x 11 paper and press the
START button.
6. Press the C button while pressing the P button.
7. Press the [PREVIOUS SCREEN] key to return
8050fs1024
to the "36 mode menu screen."
1-112
Advertisement
Table of Contents
