Maintenance Procedure Of The Fusing Section; Removing/Reinstalling The Fusing Unit - Konica Minolta bizhub 500 Service Manual

3. PERIODIC CHECK

3.15 Maintenance procedure of the fusing section

3.15.1

Removing/reinstalling the fusing unit

Caution
• Since the fusing section gets hot immediately after turning off the main power switch (SW1) or the
power switch (SW2), you may suffer a burn. Be sure to conduct the operations when the tempera-
ture goes down sufficiently.
A. Procedure
[2] [1]
76
1.
Open ADU.
(See P.122)
2.
Remove the right cover /Up.
(See P.122)
3.
Open the conveyance unit.
(See P.27)
4.
Loosen the screw [1] and remove the front auxil-
iary cover [2].
50gaf2c085na
Field Service Ver1.0 Feb.2006