Access Bios Setup Utility Menus - Sun Oracle Sun Server X4-2 Service Manual

TABLE:
Function
Key
F9
F10
F12
Related Information
"Access BIOS Setup Utility Menus" on page 164
■
"Navigate BIOS Setup Utility Menus" on page 165
■

▼ Access BIOS Setup Utility Menus

You can access the BIOS Setup Utility screens from the following interfaces:
Use a USB keyboard and VGA monitor connected directly to the server. (A mouse
■
is not required to access the BIOS Setup Utility.)
Use a terminal (or terminal emulator connected to a computer) through the serial
■
port on the back panel of the server.
Connect to the server using the Oracle ILOM Remote Console application.
■
1. Reset or power on the server.
For example, to reset the server:
■
■
■
The power-on self-test (POST) sequence begins.
164 Sun Server X4-2 Service Manual • May 2014
Function Key to Control Key Sequence Mapping (Continued)
Control Key
Sequence BIOS POST Function
Ctrl+O Launch Oracle System Assistant.
BIOS boots to Oracle System
Assistant, bypassing the current
Boot Options Priority list for this
one-time boot method.
Ctrl+S Not applicable
Ctrl+N Activate Network boot.
From the local server, press the Power button on the front panel of the server to
power off the server, and then press the Power button again to power on the
server.
From the Oracle ILOM web interface, click Host Management > Power
Control and select Reset from the Select Action list.
From the Oracle ILOM CLI on the server SP, type reset /System
BIOS Setup Function
Activate Load Optimal Values
pop-up menu. (Not applicable
to UEFI Driver Control menu)
Activate Save and Exit pop-up
menu. (Not applicable to UEFI
Driver Control menu)
Not applicable