Identify And Remove A Faulty Dimm - Sun Oracle Sun Server X4-2 Service Manual

Fault Remind Button Location
FIGURE:

▼ Identify and Remove a Faulty DIMM

1. Prepare the server for service.
a. Power off the server, and disconnect the power cords from the power
supplies.
See "Powering Down the Server" on page 33
b. Extend the server to the maintenance position.
See "Extend the Server to the Maintenance Position" on page
c. Attach an antistatic wrist strap to your wrist and then to a metal area on the
chassis.
See "Take Antistatic Measures" on page
d. Remove the server top cover.
See "Remove the Server Top Cover" on page
42.
43.
Servicing CRUs That Require Server Power-Off
39.
71