Sun Oracle Sun Server X4-2 Service Manual page 156

b. Install the HDDs 4-7 cable connector into the top disk backplane [2].
c. Plug the HDDs 4-7 cable connector into the connector on the right side of the
5. Install the PCIe riser with the internal HBA card into PCIe slot 3.
See
6. Install all of the server fan modules.
See
7. Return the server to operation.
a. Install the server top cover.
b. Close the server fan door.
c. Return the server to the normal rack position.
d. Reconnect the data cables to the server and reconnect the power cords to the
e. Power on the server.
Related Information
"Remove Storage Drive SAS Cables" on page 139
■
142 Sun Server X4-2 Service Manual • May 2014
HBA card (the connector that is closest to the power supplies) [3].
"Install a PCIe Riser Into PCIe Slots 3 and 4" on page
"Install a Fan Module" on page
See "Install the Server Top Cover" on page
See "Return the Server to the Normal Rack Position" on page
server power supplies.
See "Reconnect Data Cables and Power Cords" on page
See "Power On the Server" on page
Verify that the Power/OK status indicator is steady on.
54.
145.
150.
82.
148.
149.