Sun Oracle Sun Server X4-2 Service Manual page 140

b. Open the server fan door.
c. To remove the storage drive cage cover, slide it forward (toward the front of
3. Loosen the screw that secures the front indicator module (FIM) assembly to the
server chassis [2].
FIGURE:
4. Carefully slide the FIM assembly toward the rear of the server enough to lift it
over the Phillips screw and out of the server [2].
5. Disconnect the FIM cable from the FIM assembly and set the assembly aside [3].
6. Continue to
Related Information
"Install the Front Indicator Module" on page 127
■
126 Sun Server X4-2 Service Manual • May 2014
See "Open the Server Fan Door" on page
the server) and lift it up.
Removing the Front Indictor Module
"Install the Front Indicator Module" on page
43.
127.