Install The Dvd Drive - Sun Oracle Sun Server X4-2 Service Manual

5. To disengage the DVD drive from the chassis, press and hold the release tab on
the rear of the DVD drive up slightly [3].
6. Gently push the DVD drive toward the front of the server, slide it out of the
server, and place it on an antistatic mat [4].
7. Place the DVD drive on an antistatic mat.
Related Information
"Install the DVD Drive" on page 93
■

▼ Install the DVD Drive

1. Push the DVD drive into the chassis until the release tab on the rear of the
DVD drive engages the chassis with an audible click (see
the DVD Drive on page 92
2. Reconnect the DVD drive cable [2].
3. Return the server to operation.
a. Install the server top cover.
See "Install the Server Top Cover" on page
b. Close the fan door.
c. Return the server to the normal rack position.
See "Return the Server to the Normal Rack Position" on page
d. Reconnect the power cords to the server power supplies and reconnect the
data cables.
See "Reconnect Data Cables and Power Cords" on page
e. Power on the server.
See "Power On the Server" on page
Verify that the Power/OK status indicator is steady on.
Related Information
"Remove the DVD Drive" on page 91
■
[4]).
145.
150.
Servicing CRUs That Require Server Power-Off
FIGURE: Removing
148.
149.
93