Sun Oracle Sun Server X4-2 Service Manual page 236

BIOS UEFI Driver Control Menu Options
TABLE:
Setup Options
iSCSI Configuration
iSCSI Initiator Name
Add an Attempt
222 Sun Server X4-2 Service Manual • May 2014
Options Default
NA NA
NA (must be None
specified)
When this option is selected, a sub-menu with following options is presented.
• iSCSI Attempt None
Name
• iSCSI Mode Disabled
Description
Select to configure the iSCSI initiator name
parameters. Only available in UEFI BIOS mode.
The worldwide unique name of the iSCSI Initiator.
Only IQN format is accepted.
The human name that you assigned to this attempt.
Set to Enabled for multipath I/O (MPIO). MPIO can
boost the performance of an application by load
balancing traffic across multiple ports.