Sun Oracle Sun Fire X4470 Getting Started Manual

Sun Oracle Sun Fire X4470 Getting Started Manual

Hide thumbs Also See for Sun Fire X4470:

Advertisement

Quick Links

Sun Fire X4470 Server
Getting Started Guide
This guide describes the minimum steps you must perform for initial power-on and configuration of the server.
Detailed installation information can be found in the Sun Fire X4470 Server Installation Guide, which is available
at Oracle's documentation web site:
01&id=homepage
Refer to the section
"Documentation for This Product"
for your system.
Contents
Oracle's Sun Fire X4470 Server is shipped with safety documentation and the components that you ordered for
your configuration. Optional components or rack installation equipment might be shipped separately.
Documentation and Media Kit
The Documentation and Media Kit is an orderable option for your system. It contains installation
documentation, the Tools and Drivers DVD, the Oracle Hardware Installation Assistant CD, and the Oracle
SunVTS CD. You can order the Documentation and Media Kit at any time, using the following marketing part
number: X2361A.
You also can download the documentation and software that are included in the Documentation and Media Kit.
For documentation, go to:
01&id=homepage
For software, go to:
Safety and Compliance Information
Before performing an installation, refer to the following documents for safety information regarding the
Sun Fire X4470 Server:
Important Safety Information for Sun Hardware Systems – Printed document included in the ship kit.
Sun Fire X4470 Server Safety and Compliance Guide – Online at Oracle's documentation website.
http://www.oracle.com/pls/topic/lookup?ctx=E19694-
http://www.oracle.com/pls/topic/lookup?ctx=E19694-
http://support.oracle.com
at the end of this document for a list of documentation
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sun Fire X4470 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sun Oracle Sun Fire X4470

  • Page 1 Getting Started Guide This guide describes the minimum steps you must perform for initial power-on and configuration of the server. Detailed installation information can be found in the Sun Fire X4470 Server Installation Guide, which is available at Oracle’s documentation web site: http://www.oracle.com/pls/topic/lookup?ctx=E19694-...
  • Page 2: Install Optional Components

    Before installing the server into a rack, you must first install any optional components that you ordered with the server, and that were not factory installed. Refer to the Sun Fire X4470 Server Service Manual for instructions on installing optional components.
  • Page 3: Connect The Power Cords

    SP is ready for use. Note that the server is not initialized or powered on yet. Do not apply main power to the rest of the server until you are ready to install an operating system. Sun Fire X4470 Server Front Panel Controls FIGURE 2...
  • Page 4: Apply Main Power To The Server

    Note – When the server powers on, the power-on self-test (POST) can take several minutes to complete. 3. Continue with initial software setup tasks, as described in the Sun Fire X4470 Server Installation Guide. ▼ Update Firmware It is highly recommended that you use the Oracle Hardware Installation Assistant to upgrade system BIOS and Oracle Integrated Lights Out Manager (ILOM) firmware.
  • Page 5: Service And Technical Support

    Operating Read the Sun Fire X4470 Server For patch information, system: document: For installation information, go to: go to: Preinstalled Installation Guide • Sun Fire X4470 Server Product http://www.oracle.com/us/ operating Notes products/servers-storage/ system servers/x86/index.html • http:// support.oracle.com Oracle Installation Guide for Oracle...
  • Page 6: Documentation Comments

    Task Document Type Review safety information. Safety and Compliance Manual Important Safety Information for Sun Hardware Systems Review known issues and workarounds. Product Notes Install rack hardware. Cable and power on Installation Guide server. Connect to the SP and determine network settings.

Table of Contents