Sun Oracle Sun Server X4-2 Service Manual page 223

BIOS Advanced Menu Options (Continued)
TABLE:
Setup Options
TPM Support
TPM State
Current TPM Status
Information (R/O)
NETWORK STACK
Network Stack
Ipv4 PXE Support
Ipv6 PXE Support
BMC NETWORK
BMC Network: Current
Active Management Port
(R/O)
Refresh
Active Management Port
Options
Disabled/Enabled
Disabled/Enabled
Disabled/Enabled
Disabled/Enabled
Disabled/Enabled
NETMGT/
NET0/
NET1/
NET2/
NET3
Defaults
Enabled
Disabled
Enabled
Enabled
Disabled
BIOS Setup Utility Menu Options
Description
Enable or disable TPM support.
Only UEFI BIOS implements this
setup option. If disabled, the OS
will not show TPM. Reset of the
platform is required.
Displays whether TPM Support
is enabled.
If TPM Support is disabled,
Current TPM Status displays
"TPM SUPPORT OFF."
If TPM Support is enabled,
Current TPM Status displays:
• TPM Enabled Status:
• TPM Active Status:
• TPM Owner Status:
Configure network stack
settings.
Enable or disable the UEFI
network stack.
Enable or disable IPv4 PXE Boot
support. If disable, the IPv4 Boot
Option will not be created.
Enable or disable IPv6 PXE Boot
support. If disable, the IPv6 Boot
Option will not be created.
Configure Baseboard
Management Controller (BMC)
network parameters.
Active management port settings
are displayed.
Refresh current BMC network
information with the latest
information from the service
processor.
Change the management port
that is currently active.
209