Priority Mapping Table And Priority Marking Configuration Example - HP FlexNetwork MSR Series Configuration Manuals

Priority mapping table and priority marking configuration
example
Network requirements
As shown in
•
The Marketing department connects to GigabitEthernet 1/0/1 of Device, which sets the 802.1p
priority of traffic from the Marketing department to 3.
•
The R&D department connects to GigabitEthernet 1/0/2 of Device, which sets the 802.1p
priority of traffic from the R&D department to 4.
•
The Management department connects to GigabitEthernet 1/0/3 of Device, which sets the
802.1p priority of traffic from the Management department to 5.
Configure port priority, 802.1p-to-local mapping table, and priority marking to implement the plan as
described in
Table 2 Configuration plan
Traffic
destination
Public servers
Internet
Figure 7:
Table 2.
Traffic priority order
R&D department
Management
department > Marketing
department
Management
department > Marketing
department >
department
Queuing plan
Traffic source
R&D department
>
Management
department
Marketing department
R&D department
Management
R&D department
Marketing department
41
Output Queue
queue priority
6 High
4 Medium
2 Low
2 Low
6 High
3 Medium