Displaying Detailed Information About A Card - HP FlexNetwork HSR6800 Installation Manual

Please input the file name(*.gz)[cfa0:/diag.gz]:aa.diag.gz
Diagnostic information is outputting to cfa0:/aa.diag.gz.
Please wait...
Save successfully.
Execute the more aa.diag command in user view, and then press the Page Up and Page
Down keys to view the contents of the file aa.diag.
•
Display the operating statistics for each module of the router.
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
==================================================================
===============display cpu===============
Chassis 1 Slot 1 CPU 0 CPU usage:
===========================================================
=================================================================
===============display cpu-usage history chassis 1 slot 1===============
100%|
95%|
90%|
85%|
80%|
75%|
70%|
65%|
60%|
55%|
50%|
45%|
40%|
35%|
30%|
25%|
20%|
15%|
10%|
5%|
------------------------------------------------------------
...

Displaying detailed information about a card

•
Use the display device verbose command to display detailed information about all cards.
<Sysname>display device verbose
Slot No.
---------------------------------------------------------------------
1% in last 5 seconds
1% in last 1 minute
2% in last 5 minutes
#
10 20
Board type Status
30 40
Primary SubSlots
49
50 60 (minutes)