Displaying Detailed Information About A Card - HP FlexNetwork HSR6802 Installation Manual

===============display clock===============
=================================================
08:54:16 UTC Fri 15/06/2012
===================================================
===============display version===============
===================================================
...

Displaying detailed information about a card

•
Use the display device verbose command to display detailed information about all cards.
<Sysname>display device verbose
System-mode(Current/After Reboot): Normal/Normal
Slot No.
---------------------------------------------------------------------
0
1
2
3
4
5
Slot 4 : FIP-110(4 Subslots)
Subslot 1 : MIM-4GBE
Subslot 2 : MIM-4GBE
•
Use the display device slot slot-number command to display detailed information about the
card in the specified slot.
<Sysname> display device slot 1
System-mode(Current/After Reboot): Normal/Normal
Slot 1 : RSE-X2
SubSlot No.
--------------------------------------------------------
1
Table 12 Command output
Field
Slot No.
Card Type
Status
Max Ports
Board type Status
N/A Absent
RSE-X2 Normal
N/A Absent
N/A Absent
FIP-110 Normal
N/A Absent
Card Type
Fixed SubCard
Description
Slot number of the card.
Card model. The value NONE indicates that no card is present in the slot.
Running status of the card:
•
Absent—No card is present in the slot.
•
Fault—The card in the slot is booting, or the card has failed and cannot
boot correctly.
•
Normal—The card in the slot is operating correctly.
Maximum number of ports that the card supports.
Primary SubSlots
N/A N/A
Master 0
N/A N/A
N/A N/A
N/A 4
N/A N/A
Status Max Ports
Normal 3
52