Outputting System Information To The Web Interface - HP 5820X Switch Configuration Manual

To do...
6. Configure the format of the
time stamp.

Outputting system information to the web interface

This feature allows you to control whether to output system information to the web interface and which
system information can be output to the web interface. The web interface provides abundant search
and sorting functions. If you configure the device to output the system information to the web interface,
view system information by clicking corresponding tabs after logging in to the device through the web
interface.
To set to output system information to the web interface:
To do...
1. Enter system view.
2. Enable information center.
Name the channel with a
3.
specified channel number.
4. Configure the channel through
which system information can
be output to the web
interface.
5. Configure the output rules of
the system information.
6. Configure the format of the
time stamp.
NOTE:
You can configure the device to output log, trap and debugging information to a channel. However,
when this channel is bound with the output destination web interface, after logging in through the web
interface, view log information of specific types only, and other types of information will be filtered out.
Use the command...
info-center timestamp { debugging
| log | trap } { boot | date |
none }
Use the command...
system-view
info-center enable
info-center channel channel-
number name channel-name
info-center syslog channel
{ channel-number | channel-
name }
info-center source { module-name
| default } channel { channel-
number | channel-name } [ debug
{ level severity | state state }* |
log { level severity | state state }*
| trap { level severity | state
state }* ]*
info-center timestamp { debugging
| log | trap } { boot | date |
none }
238
Remarks
Optional.
The time stamp format for log,
trap and debugging information
is date by default.
Remarks
—
Optional.
Enabled by default.
Optional.
See Table 9 for default channel
names.
Optional.
By default, system information is
output to the web interface
through channel 6.
Optional.
See "Default output rules of
system information."
Optional.
The time stamp format for log,
trap and debugging information
is date by default.