Outputting System Information To The Web Interface - HP MSR Series Configuration Manual

Step
2. Enable the information center.
3. Name the channel with a
specified channel number.
4. Configure an output channel
for the SNMP module.
5. Configure an output rule for
the SNMP module.
6. Configure the timestamp
format.

Outputting system information to the Web interface

The Web interface only receives log information, and discards trap and debug information.
This feature allows you to control whether to output system information to the Web interface and, if so,
which system information can be output to the Web interface. The Web interface provides abundant
search and sorting functions. If you output system information to the Web interface, you can view the
system information by clicking corresponding tabs after logging in to the device through the Web
interface.
To output system information to the Web interface:
Step
1. Enter system view.
2. Enable the information center.
3. Name the channel with a
specified channel number.
4. Configure an output channel
for the Web interface.
Command
info-center enable
info-center channel
channel-number name
channel-name
info-center snmp channel
{ channel-number |
channel-name }
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state }* | log { level
severity | state state }* | trap
{ level severity | state state }* ]*
info-center timestamp { debugging
| log | trap } { boot | date | none }
Command
system-view
info-center enable
info-center channel
channel-number name
channel-name
info-center syslog channel
{ channel-number |
channel-name }
187
Remarks
Optional.
Enabled by default.
Optional.
See Table 6 for default channel
names.
Optional.
By default, system information is
output to the SNMP module
through channel 5 (known as
snmpagent).
Optional.
See "Default output rules of system
information."
Optional.
The timestamp format for log, trap
and debug information is date by
default.
Remarks
N/A
Optional.
Enabled by default.
Optional.
See Table 6 for default channel
names.
Optional.
By default, system information is
output to the Web interface
through channel 6.