Moving The Dm300C/400C; Warning: Do Not Move The Dm475 By Yourself - Pitney Bowes DM300c series Operator's Manual

2 • Getting to Know Your System
Moving the DM300c/DM400c
If you need to move your DM300c/DM400c mailing system, simply
unplug the power and any other cables attached to the back of the
machine (see figure on previous pages) and slide the stacker tray
away from the unit.
DM300c

Warning: Do not Move the DM475 by Yourself

You should not move the DM475 machine by yourself. Call Pitney
Bowes to arrange a Service visit.
DM475
CAUTION: Do not move the DM475 by yourself. The
machine is made to separate into two sections, and by
moving without proper disassembly, you may:
• Cause serious injury to yourself.
• Cause serious damage to the machine.
• Cause the WOW module to go out of calibration.
• Void any service warranties.
Contact Pitney Bowes to arrange a Service visit for
moving the machine (additional charges may apply).
2-12
Stacker Tray
DM400c
SDC755D