Moving The Dm300C/Dm400C; Special Warning For Not Moving Dm475 By Yourself - Pitney Bowes DM300c Operator's Manual

2 • Getting to Know Your System

Moving the DM300c/DM400c

If you need to move your DM300c/DM400c mailing system, simply
unplug the power and any other cables attached to the back of the
machine (see figure on previous pages) and slide the stacker tray
away from the unit.
DM300c
Special Warning for not Moving the DM475 by Yourself
You should not move the DM475 machine by yourself. Call Pitney
Bowes to arrange a Service visit.
DM475
CAUTION: Do not move the DM475 by yourself. The
machine is made to separate into two sections, and by
moving it without proper disassembly, you may:
Contact Pitney Bowes to arrange a Service visit for
moving the machine (additional charges may apply).
See page v for contact information.
2-12
• cause serious injury to yourself
• cause serious damage to the machine
• cause the WOW module to go off of calibration
• void any service warranties
Stacker Tray
DM400c
SV62261 Rev. C