Trim Components On The Mobility Base; Removing/Installing The Battery Cover - Otto Bock B-Series Service Manual

Service work
INFORMATION: Use the Allen wrench for screwing in and the Allen head of the support bolts for tigh-
tening.
5
7
4.6

Trim components on the mobility base

4.6.1

Removing/installing the battery cover

f Prerequisites:
Optional: Move the seat to the lowest seat height (see Seite 12).
Switch off the control unit and deactivate the main fuse (see Seite 12).
If necessary: Remove the legrests.
Removing the battery cover
1) Fold up the seat (see Seite 13).
2) Push in the 2 mounting clips on the battery cover and lift the battery cover up and off (see Fig. 8).
Installing the battery cover
1) Put on the battery cover (see Fig. 8). The 2 mounting clips on the battery cover engage securely in the cover
when positioned correctly.
2) Fold down the seat (see Seite 13).
8
14 | Ottobock
6
B-Series