Behaviour In Case Of Breakdowns; Disposal; Safety Instructions; Disposal Information - Otto Bock 490E163 Series Instructions For Use Manual

Disposal

Flashing LED Error/warning
Brake release
9x flash*
Battery overvoltage
10x flash
* A warning signal will also sound.
Speed display
All five LEDs on the speed display flash. This indicates the following:
Flashing LED Error/warning
Communication error

8.4 Behaviour in case of breakdowns

INFORMATION
Note that the following instructions also apply for flat tyres. Independent tyre repairs by the user or an attendant
are not intended.
In case of breakdowns, promptly inform the qualified personnel who adjusted the product or the manufacturer's
service (see inside or outside of back cover for addresses). All relevant details have to be provided, such as the
type of power wheelchair, type of breakdown (e.g. problems with the motor) and if possible, the serial number of
the power wheelchair.
To get help faster, noting the address and telephone number of the qualified personnel in the field provided on the
back of these instructions for use is recommended. This information should be kept on hand, especially when driv­
ing outdoors.
9 Disposal

9.1 Safety instructions

NOTICE
Disposal of batteries
Pollution due to incorrect disposal
► Observe the information printed on the batteries by the manufacturer.
► Note that the batteries may not be disposed of as household waste.

9.2 Disposal information

Return the product to the qualified personnel for disposal.
Defective batteries are taken back by the qualified personnel in exchange when new batteries are purchased.
All components of the product must be disposed of properly in accordance with the respective national environ­
mental regulations.
44
Cause
Brake disabled
Voltage too high
Loose battery contacts
Cause
E.g. defective plug
nection, cable break
Defective controller
Possible measure
If the plug connections are OK: Con­
tact qualified personnel
Information for qualified personnel:
Read the error code and proceed
according to the service manual
Check motor brakes
Check connections to the controller
Continue driving slowly
Check cabling/plug contacts
Check plug connections and cables
on controller
Possible measure
con­ Check cabling/plug contacts on con­
troller
Contact qualified personnel
490E163=*