Removing The Battery Cover; Replacing The Batteries; Figure 26 Removing The Battery Cover - Otto Bock C1000 DS Instructions For Use Manual

6.6.3 Removing the battery cover

Proceed as follows:
1. Loosen the two knurled head screws on the left and
right of the drive unit sustainer.
2. Remove the battery cover by pulling it forward.
Figure 26 Removing the battery cover
C1000 DS

6.6.4 Replacing the batteries

WARNING
Risk of tipping due to changing the battery position. En-
sure that the batteries are up against the stop during in-
stallation and that there is no play between the batteries
and track when installing the track.
NOTICE
Unauthorised battery replacement. Batteries may only
be replaced by a specialist dealer.
Proceed as follows:
1. Turn off the control unit.
2. Remove the fuse (see Section 9.2).
3. Remove the battery cover (see Section 6.6.3)
4. Unlock the release bolt and remove the track.
Operation
Ottobock 185
|