Editing Operation Screen - Sharp IV-C35M User Manual

Setting and Operating Outlines

6-7 Editing operation screen

In this controller, the operation screen display can be changed. You can move, enlarge, reduce, or hide
any block of text.
(1) Move the cursor to "MAIN-COND" on the
operation screen and press the SET key.
(2) Move the cursor to "EDIT MAIN OPS MENU" and
press the SET key.
(3) Now the operation screen will appear. Select a
block of text you want to edit using the up, down,
6
left, and right arrow keys, and press the SET key.
A pop up menu will appear and you can select
from move, enlarge, reduce, and hide. (In this
example, the block of text "OK" is selected.)
MOVE
Select "MOVE" using the SET key. Now the
highlighted block of text can be moved using the
up, down, left, and right arrow keys. When the text
is in the desired new position, press the SET key
again.
MAGNIFCATION/REDUCTION
Move the cursor to the "ENLARGE, REDUCE" line
and press the SET key. The highlighted block of
text can be enlarged or reduced.
NON-DISP
Move the cursor to the "NON-DISP" line and press
the SET key. The highlighted block of text will be
deleted.
MAIN MENU
IVC35M
SYS-CND
OBJECT TYPE COND
SET WIZARD
EDIT MAIN OPS MENU
OPTION
ENVIRONMENT SETTING
MEMORY CARD
=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
OPS-MAIN SCREEN OBJECT SAVE RESET
TYPE00
OK
MEAS XXXXms 2001-10-14 10:38
MEAS1 MEAS-BIN-AREA
MEAS PROGRAM
MEAS RESULT
X0 7 Y0 7 READY
OPS-MAIN SCREEN OBJECT SAVE RESET
TYPE00
MOVE
XXXXms 2001-10-14 10:38
MAGNIFCATION
MEAS
REDUCTION
NON-DISP
MEAS PROGRAM
MEAS RESULT
X0 7 Y0 7 READY
6-14
COLOR F C1 BRT
COLOR F C1 BRT
F C1 DRK
LOCK FULL V
C1=002.2 OK
C2=100.0 OK
NG-IMG 00(00)
COLOR F C1 BRT
F C1 BRT
V*.*
C1=002.2 OK
C2=100.0 OK
NG-IMG 00(00)