Download Print this page

[ 2 ] When Iv-S51M Is Connected To Lcd Monitor (Iv-08Mp) Using The Monitor Cable - Sharp IV-S51M Instruction Manual

Image sensor camera
Hide thumbs

Advertisement

[ 2 ] When IV-S51M is connected to LCD monitor (IV-08MP) using the monitor cable

When IV-S51M is connected to the IV-08MP using the monitor cable, secure the IV-S51M to the
mounting surface with main housing angle brackets (accessory). IV-S51M can be mounted on the
surface either at the bottom (when vertically placed), the side (when horizontally placed), or the
backside.
(Note) When the IV-S51M and the IV-08MP are directly connected, main housing angle brackets
will not be used.
(1) Attachment at the bottom surface (when vertically placed)
IV-S51M is vertically placed and its bottom surface is secured to the mounting surface.
Attach two (2) main housing angle brackets (for the bottom/backside) to the bottom surface of the
IV-S51M with securing screws (accessory, two each: M3×8)
Securing positions of screws (4)
Secure the IV-S51M to the mounting surface using four (4) mounting holes of main housing angle
brackets.
IV-S51M
POWER
FG
+24V
USB
0
+
V
COM
Y0
Y1
Y2
Y3
USB
Y4
Y5
TERMINATOR
Y6
LINK
Y7
Y8
Y9
LAN
Y10
EXP
Y11
Y12
RX
Y13
ANALOG
Y14
RGB
Y15
RDY
HALT
C (-)
CAMERA1
X0
X1
X2
X3
X4
IV MONITOR
X5
ONLY
CAMERA2
X6
X7
Main housing angle bracket
X8
X9
X10
X11
X12
X13
X14
X15
C (+)
(The bottom view of the IV-S51M)
(Top view)
Main housing angle brackets
80
3 - 2
Mounting surface
Main housing angle brackets (2)
23.2

Advertisement

loading

  Related Manuals for Sharp IV-S51M