Selecting The Shooting Mode; S Hoo T I Ng Mod E - Sharp VE-CG40U Operation Manual

Useful Features
Capturing
Selecting the Shooting
Mode
Available in [, ], ;, ', , or . mode
This camera has five different modes for
capturing images.
Types
SINGLE: Normal mode to capture a single
still image
CONTINUOUS: Captures three consecutive
still images
SELF TIMER: Captures a still image with
time-lag of 10 seconds
BRACKET: Captures three still images at
different exposure settings
z BRACKET: Captures three still images at
different gamma settings
1
Turn on the camera in the desired mode.
2
Press the MENU button until the menu
screen appears.
3
Press l or m to select "O", then press
the SET button.
4
Press l or m to select "SHOOTING
MODE", then press the SET button.
5
Press l or m to select the desired
setting, then press the SET button.

S HOO T I NG MOD E

24
VE-CG40U-023-032
C A P T UR E 1
I MAG E S I Z E
I MAG E QU A L I T Y
S HOO T I NG MOD E
QU I C K S HO T S I NG L E
F R AME GU I D E C ON T I NUOUS
D I G I T A L Z OOM S E L F T I ME R
R E T URN B RA C K E T
B RA C K E T
S I NG L E
C ON T I NUOUS
S E L F T I ME R
B RA C K E T
B RA C K E T
24
6
Press the MENU button to turn off the
menu screen.
Notes:
• Depending on your selection in step 5, perform
the steps in the sections indicated below.
- SINGLE: p. 13
- CONTINUOUS: See the following section.
- SELF TIMER: p. 25
- BRACKET: p. 26
- z BRACKET: p. 27
• When the card capacity becomes nearly full in
step 5, the settings, CONTINUOUS, BRACKET
and z BRACKET may not be selectable.
In CONTINUOUS mode
1
Press the Shutter button half-
way down to focus on the
subject.
2
Press the Shutter button fully to
capture the image.
• The camera captures three
consecutive still images.
Notes:
• In CONTINUOUS mode, the flash does not work.
• If the card becomes full or the battery runs down
completely while shooting in continuous mode,
the camera automatically stops image capture.
02.8.27, 7:31 PM