Chapter 6: Setting And Operating Outlines; Setting And Operating Procedures - Sharp IV-C35M User Manual

Chapter 6: Setting and Operating Outlines

6-1 Setting and operating procedures

This paragraph describes the rough operation sequence of the IV-C35M.
1 System design
Plan your hardware environment to suit your use of the IV-C35M.
- Measurement program (positional deviation
measurement, degree of match inspection, etc.)
- Number of cameras, externally connected devices,
system components
- Selection of color and monochrome cameras
- Input/output (start measurement input, result
output, object type change, etc.)
- Lighting equipment, illumination, shutter speed, lens, etc.
2 Installation/assembly
Install the hardware you will be using.
- Connection of cameras and monitor to the controller
- Installation of the controller and camera body
- Connection of a power supply, input/output terminals
and external devices
3 Turning ON the power supply (controller and monitor)
Supply power to each device.
4 Environment settings
Set IV-C35M parameters according to the actual hardware environment.
- Setting the Input / Output conditions
- Communication
- Computer link
- Gain / offset adjustment
5 Enter measuring programs
Entered using the
wizard
6 Editing Operation screen
7 Other settings
Initialization
8 Operation
9 Test/inspection
0 Maintenance
Entered using the
menu tree
Self Diagnosis
6-1
Setting and Operating Outlines
(Ref. chapter)
1-4 Measurement programs
3-1 Basic system configuration
3-1 Basic system configuration
3-2 System configuration examples
5-1 Installation conditions
5-2 to 5-4 Installation, connection
and wiring methods
User's Manual (Function and Operation)
Chapter 21
User's Manual (Function and Operation)
Chapter 22
User's Manual (Function and Operation)
Chapter 23
User's Manual (Function and Operation)
page 2-15
Chapter 7: Setting Examples Using
the Set Wizard
6-4 Operation chart
6-5 Menu Tree
6-7 Editing operation screen
6-8 Option
User's Manual (Function and Operation)
Chapter 24
6