Table of Contents
Advertisement
SAFETY INSTRUCTIONS
Connection of the shield to the ground.
1
1.3 IDENTIFICATION LABEL OF THE MVW3000
The identification label of the MVW3000 is located inside the product Control Panel. The label contains important
information on the inverter.
1.4 PRELIMINARY RECOMMENDATIONS
DANGER!
Only qualified personnel, familiar with the MVW3000 inverter and related equipment must plan or
perform the installation, commissioning, operation and maintenance of this equipment.
Such personnel must follow the safety instructions described in this manual and/or defined by local
standards.
Failure to comply with the safety instructions may cause risk of death and/or equipment damage.
NOTE!
For the purposes of this manual, qualified personnel are those trained in order to be able to:
1. Install, ground, power up and operate the MVW3000 in accordance with this manual and the
safety legal procedures in force.
2. Wear/use protective equipment according to the standards in force.
3. Give first aid.
MVW3000 | 1-2
AUTOMATION UNIT
SWITCHGEAR AND CONTROLGEAR
TYPE: MVW3000
MANUFACTURING YEAR:
DOCUMENT : 10004545394
SERIAL No:
MATERIAL: 13777913
WEIGHT: 1560 kg
IP: 41
INSTRUCTION MANUAL
Figure 1.1: MVW3000 identification label (example)
Ur: 7.2 kV
fr: 50 Hz
Up: 45 kV
Ud: 15 kV
COMMAND Ua: 220 Vca
Ir (GENERAL BUSBAR): 200 A
Ik: 15.7 kA
Ip: 40.8 kA
Advertisement
Table of Contents
