Suzuki GSF650A Service Manual page 277

• Check the gearshift cam stopper moves smoothly.
• Locate the gearshift cam in the neutral position.
1
2
"A"
(a)
• Install the gearshift cam stopper plate (5).
NOTE
Align the gearshift cam pin "B" with the
gearshift cam stopper plate hole "C".
5
"C"
4
3
I718H1140244-01
1
I717H1140177-02
"B"
I717H1140178-01
• Apply a small quantity of THREAD LOCK to the
gearshift cam stopper plate bolt and tighten it to the
specified torque.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
Tightening torque
Gearshift cam stopper plate bolt (b): 13 N·m (1.3
kgf-m, 9.5 lbf-ft)
• Apply a small quantity of THREAD LOCK to the
gearshift arm stopper (6) and tighten it to the specified
torque.
: Thread lock cement 99000–32030
(THREAD LOCK CEMENT SUPER 1303 or
equivalent)
Tightening torque
Gearshift arm stopper (c): 19 N·m (1.9 kgf-m, 13.5
lbf-ft)
6
(c)
Engine Mechanical: 1D-65
(b)
I717H1140179-02
I717H1140180-01