Suzuki GSF650A Service Manual page 109

P0105-L (Use of SDS)
Step
1 1) Click the data monitor button (1).
2) Check the manifold absolute pressure 1 data.
Approx. –20 kPa (–0.2 kgf/cm
2 1) Turn the ignition switch OFF.
2) Lift and support the fuel tank. Refer to "Fuel Tank
Removal and Installation in Section 1G (Page 1G-9)".
3) Check the IAP sensor coupler for loose or poor contacts.
If OK, then check the IAP sensor lead wire continuity.
Action
1
I718H1110251-01
I718H1110163-02
3 , –2.8 psi) and less OK?
I718H1110159-01
Engine General Information and Diagnosis:
Yes
Go to Step 2.
Go to Step 3.
1A-34
No
Go to Step 4.
B and W/Bl wire open,
W/Bl wire shorted to the
ground.