Rear Wheel Assembly Construction (Gsf650A/Ua/Sa/Asuk7); Rear Wheel Assembly Removal And Installation (Gsf650A/Ua/Sa/Asuk7) - Suzuki GSF650A Service Manual

Rear Wheel Assembly Construction (GSF650A/UA/SA/ASUK7)

2
(b)
1. Rear sprocket nut
2. Rear axle nut
3. Brake caliper mounting bolt
4. Brake disc bolt
5. Rear wheel speed sensor
Rear Wheel Assembly Removal and Installation
(GSF650A/UA/SA/ASUK7)
Removal
1) Support the motorcycle with the center stand.
CAUTION
!
Make sure that the motorcycle is supported
securely.
Left
1
(a)
"a"
"a": Clearance
"b": 0.3 – 1.5 mm (0.012 – 0.059 in)
: 60 N⋅m (6.0 kgf-m, 43.5 lb-ft)
: 100 N⋅m (10.0 kgf-m, 72.5 lb-ft)
: 22 N⋅m (2.2 kgf-m, 16.0 lb-ft)
B817H22406020
Right
"b "
4
: 23 N⋅m (2.3 kgf-m, 16.5 lb-ft)
: Apply grease.
: Apply thread lock to thread part.
2) Remove the rear wheel speed sensor by removing
the mounting bolts. Refer to "Rear Wheel Speed
Sensor Removal and Installation in Section 4E
(Page 4E-70)".
Wheels and Tires: 2D-24
B817H22406019
(d)
5
3
(c)
I717H2240004-01