Front Fork Disassembly And Assembly - Suzuki GSF650A Service Manual

4) Tighten the front fork lower clamp bolts (1).
Tightening torque
Front fork lower clamp bolt (b): 23 N·m (2.3 kgf-
m, 16.5 lbf-ft)
1
(b)
5) Tighten the front fork upper fork clamp bolt (3).
Tightening torque
Front fork upper clamp bolt (c): 23 N·m (2.3 kgf-
m, 16.5 lbf-ft)
6) Set the front fender plate nut to the front fender.
NOTE
Face the triangle mark on the front fender
brace to the front side "A".
"A"
7) Remount the front fender along with the fender plate
nut.
8) Install the front wheel assembly. Refer to "Front
Wheel Assembly Removal and Installation (GSF650/
S/U/SUK7) in Section 2D (Page 2D-4)".
NOTE
Before tightening the front axle and front axle
pinch bolts, move the front fork up and down
four or five times.
After remounting the brake caliper, pump the
brake lever until the pistons push the pads
correctly.
I717H1220006-01
3
(c)

Front Fork Disassembly and Assembly

Refer to "Front Fork Removal and Installation (Page 2B-
2)".
I717H1220007-01
Disassembly
1) Remove the front fork protector (1).
I718H1220010-02
Front Suspension:
WARNING
!
2B-3
I717H1220009-01
B817H22206003
1
I717H1220010-01