Suzuki GSF650A Service Manual page 267

4) Make sure that all of the bolts are removed. Then,
tap the sides of the lower crankcase using a plastic
hammer to separate the upper and lower crankcase
halves and then lift the lower crankcase off of the
upper crankcase.
5) Remove the dowel pins and O-rings (1).
Crankshaft / Conrod / Cam Chain
1) Remove the crankshaft assembly (1) from the upper
crankcase.
2) Remove the thrust bearings (2).
NOTE
The crankshaft thrust bearings (2) are located
between the crankshaft assembly and upper
crankcase.
2
I717H1140146-01
1
I717H1140147-01
1
I717H1140148-01
3) Remove the cam chain (3) from the crankshaft.
NOTE
Remove the conrod if necessary. Refer to
"Conrod Removal and Installation (Page 1D-
67)".
Cam Chain Tensioner
Remove the dampers (1) and cam chain tensioner (2).
Transmission / Gearshift
Remove the transmission component. Refer to
"Transmission Removal in Section 5B (Page 5B-2)".
Engine Mechanical: 1D-55
3
I717H1140149-01
1
2
I718H1140186-01
I717H1140150-01