9B-9 Lighting Systems:
2) Remove the tool set (1) and disconnect the turn
signal light coupler (RH: Black, LH: Gray) (2).
1
3) Remove the turn signal light (3) by removing the nut.
Installation
Install the rear turn signal light in the reverse order of
removal.
Reflex Refractor Construction (GSF650/S/A/SAK7)
1
(a)
1. Front reflex refractor (For E-28)
2. Front fork
2
I717H1920009-01
3
I718H1920029-02
(b)
2
3. Rear reflex refractor (For E-28)
4. Rear fender
Turn Signal Light Bulb Replacement
CAUTION
!
If you touch the bulb with your bare hands,
clean the bulb with a cloth moistened with
alcohol or soapy water to prevent premature
bulb failure.
1) Remove the lens by removing the screw.
2) Replace the bulb (1).
1
3) Reinstall the lens.
(a)
3
: 1.8 N⋅m (0.18 kgf-m, 1.3 lb-ft)
: 4.5 N⋅m (0.45 kgf-m, 3.25 lb-ft)
B817H29206016
I718H1920030-01
I718H1920031-01
B817H29206017
4
I718H1920044-05