Suzuki GSF650A Service Manual page 133

P1750-L (Use of SDS)
Step
1 1) Click the data monitor button (1).
2) Check the manifold absolute pressure 2 data.
Approx. 0 kPa (0 kgf/cm
2 1) Turn the ignition switch OFF.
2) Check the IAP sensor coupler for loose or poor contacts.
If OK, then check the IAP sensor lead wire continuity.
3) Disconnect the IAP sensor coupler.
4) Insert the needle pointed probes to the lead wire coupler.
Action
1
I718H1110251-01
I718H1110183-02
3 , 0 psi) and less OK?
I717H1110013-02
Engine General Information and Diagnosis:
Yes
Go to Step 2.
Go to Step 3.
1A-58
No
Go to Step 4.
R and G/B wire open,
W/Bl wire shorted to the
ground.