Active Control Inspection
NOTE
Cooling fan relay and cooling fan motor operation can be checked until the engine coolant
temperature is less than 100 °C (212 °F) after starting the engine.
1) Set up the SDS tool. Refer to "SDS operation manual" for further details.
2) Start the engine and run it idling condition.
3) Click "Cooling fan relay control" (1).
4) Click the operate button (2).
At this time, if an operation sound is heard from the cooling fan relay and cooling fan motor is operated, the
function is normal.
5) Click the stop button (3) to check the operation properly.
Engine General Information and Diagnosis:
1
I718H1110244-01
1A-116
2
I718H1110237-02
3
I718H1110138-02