Suzuki GSF650A Service Manual page 234

1D-22 Engine Mechanical:
• Install the frame down tube and engine mounting
brackets.
• Tighten the bolts and nuts to the specified torque.
NOTE
The frame down tube nuts are self-locking.
Once the nuts have been removed, they are
no longer of any use.
Tightening torque
Frame down tube bolt (a): 50 N·m (5.0 kgf-m, 36.0
lbf-ft)
Engine mounting bracket bolts (b): 23 N·m (2.3
kgf-m, 16.5 lbf-ft)
(a)
Left
1 "a"
1. Engine mounting bolt (Front upper)
2. Engine mounting bolt (Rear lower)
3. Engine mounting bolt (Rear upper)
• Tighten all engine mounting bolts and nuts to the
(a)
(a)
I717H1140057-03
Right
(c)
"a": 215 mm (8.5 in)
"b": 155 mm (6.1 in)
: 55 N⋅m (5.5 kgf-m, 40.0 lb-ft)
(b)
specified torque, as shown in the following illustration.
Left
3 " b "
2 "b"
: 88 N⋅m (8.8 kgf-m, 63.5 lb-ft)
I717H1140058-01
Right
(d)
(d)
I717H1140059-03