Self-Diagnosis Function And Abs Indicator Light Description - Suzuki GSF650A Service Manual

4E-5 ABS:
Self-diagnosis Function and ABS Indicator
Light Description
The ABS control unit performs the self-diagnosis and
can store any electronically detected malfunctions as
diagnostic trouble codes. If a malfunction has occurred,
the indicator light lights up to inform the rider of the
malfunction. The special tool, when connected to the
mode select coupler, enables the ABS indicator light to
display the diagnostic trouble codes.
ABS Indicator Light
The ABS indicator light informs the rider of any ABS
malfunctions. If a malfunction occurred, the ABS
indicator light flashes, during the self-diagnosis, to
indicate the diagnostic trouble code so that the correct
part can be repaired.
• When the ignition switch is turned to ON, the ABS
indicator light lights up even if no malfunction has
occurred, to indicate that the bulb is not burnt out. It
will go off after the motorcycle is ridden at more than
10 km/h (6.2 mile/h).
• If an ABS malfunction has occurred, the ABS indicator
light keeps lighting up.
B817H24501004
NOTE
When a malfunction has occurred in the ABS,
connect the special tool to the mode select
coupler to display the diagnostic trouble
code on the ABS indicator light. Refer to
"DTC (Diagnostic Trouble Code) Output
(Page 4E-23)".
Special tool
(A): 09930–82710 (Mode select switch)
FI
(A)
B/W
I718H1450122-04
O
I717H2450004-01