Rear Wheel Speed Sensor Routing Diagram - Suzuki GSF650A Service Manual

4E-11 ABS:
7: Clamp
: Clamp the sensor lead wire at the white marking.
8. Front wheel speed sensor

Rear Wheel Speed Sensor Routing Diagram

1
1. Rear wheel speed sensor
2. Brake hose No.2
3. Brake hose No.1
4. Brake hose guide
"A": Outside mark
"B": After the clamp has contacted to the stopper, tighten the bolt.
"H": Clamp the sensor lead wire on the protector of brake hose.
"I": Clamp the sensor lead wire at front side of the brake hose.
"a "
"C"
"B"
"E"
2
"A"
2
"G"
2
4
"D"
"C": Clamp sensor lead wire with white tape matched green paint of brake hose.
"D": Pass through the sensor lead wire inside of the brake hose guide.
"E": Pass through the sensor lead wire on the brake hose.
"F": Clamp the sensor lead wire upper side of brake hose.
"G": Pass through the sensor lead wire inside of the brake hose.
"a": 35 mm (1.4 in)
B817H24502004
3
"F"
2
I717H2450008-01