Suzuki GSF650A Service Manual page 436

2D-25 Wheels and Tires:
3) Remove the rear axle nut (1) and draw out the rear
axle.
4) Remove the rear axle and disengage the drive chain
from the rear sprocket.
5) Remove the rear wheel assembly.
CAUTION
!
Do not operate the rear brake pedal with the
rear wheel removed.
6) Remove the collar (2) and spacer (3).
2
1
I717H2240017-01
I717H2240018-01
3
I717H2240019-01
Installation
Refer to "Wheel Speed Sensor and Sensor Rotor
Inspection in Section 4E (Page 4E-73)".
1) Install the collar (1) and spacer (2).
1
2) Install the rear wheel with the rear axle and tighten
the rear axle nut temporarily.
3) Adjust the drive chain slack after installing the rear
wheel. Refer to "Drive Chain Inspection and
Adjustment in Section 0B (Page 0B-17)".
4) Tighten the rear axle nut (3) to the specified torque.
Tightening torque
Rear axle nut (a): 100 N·m (10.0 kgf-m, 72.5 lbf-
ft)
WARNING
!
After remounting the rear wheel, pump the
brake pedal several times to check for proper
brake operation.
5) Install the rear wheel speed sensor mounting bolts.
Refer to "Rear Wheel Speed Sensor Removal and
Installation in Section 4E (Page 4E-70)".
6) Check the clearance between the rear wheel speed
sensor. Refer to "Rear Wheel Speed Sensor
Removal and Installation in Section 4E (Page 4E-
70)".
2
I717H2240020-01
3
(a)
I717H2240021-01