Table 2-111 Maximum System Capacities For Application Interface Blades - NEC Univerge SV8100 Features And Specifications Manual

Issue 11.0
Table 2-110 Maximum System Capacities for Trunk Interface Blades (Continued)
Trunk Interface
Blades
CD-4ODTA
Note 1: Calculating maximum capacities are based on the system having a minimum of eight Digital Line (DLC) ports,
four trunk ports.
Note 2: Refer to Table 2-112 Board Power Factor on page

Table 2-111 Maximum System Capacities for Application Interface Blades

Application
Interface Blades
CD-VM00
CD-RTB
2 - 1702
Description
The CD-4ODTA Tie Line blade is an
out band dial type analog tie line
interface blade. This blade supports
system connections to either 2-wire
(four lead, tip/ring) or 4-wire (eight
lead, tip/ring/tip 1/ ring 1) E&M
signalling tie lines (determined in
Program 10-03). System programming
is also used to select the connection
types with Type 1 or Type V.
The CD-4ODTA consumes 4 ports
ranging between ports 001~200. This
blade is installed in slots 2-6 of a
chassis with CPU and slots 1-6 of
expansion chassis. The maximum
number depends on other trunk blades
installed. This blade shares the total
number of CO/PBX lines in the system.
Description
This CD-VM00 is a PC platform that
contains data storage for voice
recording and application software
supporting a maximum of 16 ports.
The Router blade is an 4-port
switching hub which complies with the
ethernet specification for both
100Base-TX and 10Base-T. This blade
is compatible in LAN applications
using 10Mbps and 100Mbps. All ports
automatically identify and switch
100Base-TX, 10Base-T and Full/Half
Duplex.
Maximum Capacities
Basic Port
Package Port Package
5
2-1703.
Maximum Capacities
Basic Port
Package
1
1
UNIVERGE SV8100
Notes
Expanded
23 –
Notes
Expanded
Port Package
1 Note: 1
1 Note: 1
Universal Slots