NEC Univerge SV8100 Features And Specifications Manual page 1790

Issue 11.0
Program
Program Name
Number
47-11-02 VM8000 InMail Answer Table
Options – Override Mailbox
Category
Override Mailbox Number
2 - 1758
Description/Comments
Specify the category of the
mailbox where Automated
Attendant calls should route when
you enable Answer Schedule
Override.
VM8000 InMail mailbox categories
are Subscriber Mailbox, Master
Mailbox, and Routing Mailbox.
VM8000 InMail handles the
routing according to the type of
mailbox (Subscriber, Call Routing,
or Announcement) within the
specified category:
If the Override Mailbox is a

Subscriber Mailbox, the outside
caller hears the mailbox
greeting (if recorded) and can
leave a message.
If the Override Mailbox is an

Announcement Mailbox, the
outside caller shears the
recorded announcement.
Depending on how the
Announcement Mailbox is
programmed, InMail then
hangs up, reroutes the call, or
provides additional dialing
options.
If the Override Mailbox is a Call

Routing Mailbox, the outside
caller hears the instruction
menu and can dial any option
allowed by the associated Dial
Action Table.
 If any Input Data value is
entered, the terminal displays
the Override Mailbox Number
selection below.
Specify the mailbox where
Automated Attendant calls should
route when you enable Answer
Schedule Override. The mailbox
number you select in this option
should match the mailbox
category specified in 47-11-02:
Override Mailbox Category
above.
UNIVERGE SV8100
Assigned Data
1
0 = Undefined
1 = Subscriber
Mailbox – STA
2 = Group Mailbox
3 = Routing Mailbox
(default = 0)
Digits
(three maximum, using
0~9)
(default = No Entry)
VM8000 InMail
Level
2 3

