NEC Univerge SV8100 Features And Specifications Manual page 1634

Issue 11.0
Restrictions
UC Desktop Suite does not support the Cordless DTL-8R-1 terminal.

UCB is not supported for Centralized Voice Mail.

Prior to resetting (powering off and on), the system for any reason, stop the UCB. Restart

UCB after the system comes back up.
Two SIP extensions are needed for each Aculab SIP port SV8100 Version 4000 (4.01),

UCB 5.0 SP4 and TSP 3.03 or lower software.
Each queue requires a SIP extension.

SIP extension is needed for each Aculab SIP port. SV8100 Version 5000, UCB 5.1,
 One
and TSP 4.00 or higher software required.
Call Pick Up is not supported for ringing Queue calls at agent's station.

DNIS display is not supported for incoming calls to the UCB.

When using Netlink and UCB, the trunks and extensions on the remote sites are not

supported for UCB with Version 2500 (2.50 or lower).
When using Netlink and UCB, the trunks and extensions on the remote sites are supported

for UCB with Version 2500 (2.51 or higher).
Analog phones cannot be used for Agents.

Agents can not have Hotline, Prime Line or Ringdown setup on the telephone.

Up to 64 calls can be queued up at one given moment.

When using the UCB for VM, the Large LED does not light when a new VM is received. A

key in the UCB must be set to light when a new message is received. (SV8100 Version
2000, UCB 5.0 SP1 and TSP 1.01 or lower).
When using the UCB for VM, the Large LED lights when a new VM is received. A key in the

UCB can also be set to light when a new message is received (SV8100 Version 2500,
UCB 5.0 SP2 and TSP 3.01 or higher software is required).
Only one 3rd-Party CTI connection to the SV8100 is supported. If a SV8100 system has

UCB (Unified Communications for Business), the 3rd-Party Shared Services feature of
SV8100 Desktop Applications cannot be used. If a SV8100 system has SV8100 Desktop
Applications with the 3rd-Party Shared Services, UCB cannot be used.
When using K-CCIS, link reconnect is not supported back to UCB.

Virtual Extension Keys assigned as code

on Line Keys for UCB.
UCB does not support the use of Virtual Extensions as Queues (Agents and Operators)

and Pilots (Voice Mail, Hold and Executive Conference). SV8100 Version 4000 (4.01),
UCB 5.0 SP4, and TSP 3.03 or lower software.
2 - 1602
03 do not support Voice Mail Message Indication

UCB (Unified Communications for Business)
UNIVERGE SV8100