NEC Univerge SV8100 Features And Specifications Manual page 1760

Issue 11.0
5. Voice prompts announce the first three matches, and allow the caller to dial a digit (1~3) to reach
one of the announced matches. Additionally, the caller can dial 4 to hear additional matches (if
any).
6. The caller dials the digit for the extension they wish to reach, and VM8000 InMail sends the call to
that extension. The call is sent as a Screened or Unscreened transfer, depending on programming.
For callers to use Directory Dialing, the system must have a name programmed for each extension (up
to 15 characters, A~Z, using upper and lower case letters). Each extension user should also have a
name recorded in their Subscriber Mailbox. In addition, each extension used by Directory Dialing must
be installed and have an active Subscriber Mailbox (Personal or Group).
An outside caller can route to a Master Mailbox or a Routing Mailbox programmed as a Directory Dialing
Mailbox from:
The Answer Tables Answer Schedule Override mailbox, Default mailbox, or Routing mailbox.

A GOTO action in the Dial Action Table of a Call Routing Mailbox.

VM8000 InMail: Multiple Greetings
The mailbox subscriber can record up to three greetings and make any of the three active. When a caller
leaves a message in the subscriber's mailbox, they hear the active greeting. This allows the subscriber,
for example, to record a greeting for work hours, after work, and during vacation. Instead of changing
their greeting when they leave the office, they can activate the after work greeting instead.
If the active greeting has not been recorded, a caller leaving a message in the subscriber mailbox hears,
"At the tone, you can leave your message for (extension number or name)."
Refer to the VM8000 InMail System Guide for complete details on setting these features.
VM8000 InMail: Message Playback Options
The following functions are available:
Auto Play

If Auto Play is enabled, New Messages play automatically when an extension user accesses their
Mailbox without having to dial 5.
Change Playback Order

Playback Order (FIFO: Playback from received call order and LIFO: Playback from New Messages
First) can be set by UserPro or mailbox setup.
Ability to mark message as New

The user can mark a message as "New" after playback of the message is complete.
2 - 1728
UNIVERGE SV8100
VM8000 InMail