NEC Univerge SV8100 Features And Specifications Manual page 1703

UNIVERGE SV8100
Router that supports Multicast Packets if utilizing Multicast Mode

Related Features
IP Multiline Station (SIP)
Meet Me Paging
Meet Me Paging Transfer
Paging, External
Paging, Internal
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
10-19-01 VoIP DSP Resource Selection
10-46-11 DT700 Server Information Setup
– Multicast IP Address
Unicast/Multicast Paging Mode
Description/Comments
Select type of VoIP ETU DSP
Resource. This program setting
has no affect on the terminal/trunk
port assignment or usage.
Set the Multicast IP address so
that two or more main devices
don't overlap on the same
network, or if Multicast is used by
other IP services.
Assigned Data
1
0 = Common use for
both IP extensions and
trunks
1 = IP Extension
2 = SIP Trunk
3 = CCIS
4 = Use for NetLink
5 = Blocked
Default:
Resource 1 = 1
Resource 2~128 = 0
224.0.0.0~
239.255.255.255
(default = 224.0.0.10)
Issue 11.0
Level
2 3


2 - 1671