Configuring input
settings
Learn how to configure the input source and picture-in-picture (PIP)/picture-by-picture (PBP)
settings.
Setting the main input source
Set up the active input to be used as the main image.
1. Select Menu > Input Switching & PIP > Main Input.
2. To select the active input, select ENTER.
Setting the second input source
Select an active input to be used as the picture-in-picture (PIP)/picture-by-picture (PBP).
1. Select Menu > Input Switching & PIP > PIP/PBP Input.
2. To select another active input, select ENTER.
Enabling the second input source
To activate the picture-in-picture (PIP)/picture-by-picture (PBP) setting, switch on this function.
1. Select Menu > Input Switching & PIP > PIP/PBP Enable.
2. To swap, select ENTER.
Swapping the main input and second input source
Switch the main input source with second input source.
1. Select Menu > Input Switching & PIP > Swap.
2. To swap, select ENTER.
Inspire Series 4K User Manual
020-002098-01 Rev. 1 (09-2023)
Copyright © 2023 Christie Digital Systems USA Inc. All rights reserved.
If printed, please recycle this document after use.
69