Working With Pip - Christie RPMX-D132U User Manual

#3
#4
#5
HD interlaced sources are not recommended for the PIP window.
NOTE
Other PIP or Seamless Switching tips include:
• When using two digital signals or one analog and one digital, each must be 165 megapixels/sec.
• When using two analog signals, each must be 90 megapixels/sec.
• Avoid using an interlaced source in the PIP window
• Seamless switching may affect image quality in some cases

4.11.1 Working with PIP

To control the primary image, access all picture controls through the Main menu. To control the
NOTE:
secondary (PIP) image, access picture controls through the Picture-in-Picture and Switching menu.
Use the first of six options in the PIP and Switching menu to enable and define how you want to use PIP.
Swap Main and PIP Image
Toggle the current picture-in-picture relationship so that the primary (main) image becomes secondary (PIP),
and the secondary image becomes primary. Swapping is available only when PIP is enabled.
There may be a slight delay when swapping the Primary and Secondary images.
NOTE:
PIP Enable
RPMSP-D132U & RPMSP-D180U User Manual User Manual
020-100245-03 Rev. 1 (11-2010)
Decoded signals (Input 3, Input 4, Composite video, S-Video, or any
video signal via Input 1 BNC connectors or via an analog option card).
Analog Option Cards
Digital Option Cards
F 4-19 PIP
IGURE AND
Section 4: Advanced Configuration and Controls
S M
WITCHING ENU
4-17