Removing And Installing Right Cylinder Head Cover - Volkswagen Touareg 2003 Workshop Repair Manual

Touareg 2003 ➤
8-cylinder injection engine - Edition 11.2011
❑ Removing and installing right cylinder head
❑ Removing and installing left cylinder head
15 - Cylinder head
❑ Check for distortion
❑ Removing and installing right cylinder head
❑ Removing and installing left cylinder head
❑ After renewing, renew entire coolant.
16 - Cylinder head gasket
❑ Metal gasket.
❑ Renew.
❑ Must seat on dowel pins.
❑ After renewing, renew entire coolant.
17 - 10 Nm
18 - Combination valve
❑ For secondary air system
19 - Coolant pipe
20 - O-ring
❑ Renew.
21 - 20 Nm
22 - Lifting eye
23 - Seal
❑ Renew if damaged or leaking.
Checking cylinder head for distortion
Special tools and workshop equipment required
♦ Straight edge
♦ Feeler gauges
Max. permissible distortion: 0.1 mm.
1.2 Removing and installing right cylinder
head cover
Special tools and workshop equipment required
30
Rep. gr.15 - Cylinder head, valve gear
⇒ page 40
⇒ page 30 .
⇒ page 40
⇒ page 44 .
.
⇒ page 44 .
.