Muffler Protector •3-12 - Honda TRX680FA Service Manual

FRAME/BODY PANELS/EXHAUST SYSTEM
Carrier/Fender Assembly Removal
Procedure
Remove the following:
- fuel tank side covers (page 3-6)
- center front grille (page 3-10)
- headlight connector and fender fasteners (page
3-11)
- four 8-mm bolt (carrier mounting fasteners).
Loosen the three tapping bolts.
Remove the front carrier/fender assembly while
spreading the rear portion of the fender.
Installation is in the reverse order of removal.
TORQUE: 8 mm bolt: 37 N m (3.8 kgf-m, 27 Ibf-ft)
SQUARE NUT
FRONT FENDER
HEADLIGHT
CONNECTOR
TAPPING BOLTS (loosen)
TRIM CLIPS
8 mm BOLTS
TRIM CLIPS
BOLT
MUFFLER PROTECTOR
Remove the following:
- two setting bolts
- four socket bolts
- muffler protector
Installation is in the reverse order of removal.
SOCKET BOLTS
COVER
SETTING BOLTS
3-12